Series-fed Travelling Wave Patch Array

A detailed convergence study of the series-fed travelling wave patch array is shown. The simulations are performed at 77 GHz in the WIPL-D Software suite – a full 3D EM simulation tool based on the method-of-moments. Simulated travelling wave patch…

Near field results of indoor Wi-Fi antenna after simulating the models at 2.4 GHz are presented. The Wi-Fi antenna itself is positioned inside the room with brick walls. In addition, near field results for the model of the antenna in…

This application note presents a design of a printed inverted-F antenna (IFA) used in a radio-frequency identification (RFID) reader verified through the measurements. The IFA was built and simulated using WIPL-D Pro CAD environment – the highly advanced method-of-moments (MoM)…

This application note presents the procedure for efficient definition of analytical feed in the WIPL-D software suite. The defined feed further serves as an excitation of the electromagnetic (EM) problem. The feature used is Field Generators. The procedure is described…

Common systems in the modern engineering to be investigated are multiple-input and multiple-output (MIMO) systems. Quite often, the performances of such systems are verified solely through measurement since the electromagnetic (EM) simulations are rather complex. One of the investigation methods…

This application note demonstrates emulation of magnetic ferrite tile electrical properties in WIPL-D Pro, a full 3D EM method of moments based solver (with usage of the WIPL-D Optimizer). Usually, the electrical properties themselves are unknown, while the performance of…